We are very proud to see the QLN Prestige 3 awarded an Editors’ Choice Award by Part-time Audiophile!
Many thanks to Dave McNair for his brilliant assessment of this special loudspeaker- read full review here
We are very proud to see the QLN Prestige 3 awarded an Editors’ Choice Award by Part-time Audiophile!
Many thanks to Dave McNair for his brilliant assessment of this special loudspeaker- read full review here
Read full review here
Introduction
We are pleased to introduce the Qln Prestige Five - an unprecedented 2.5-way, floor standing loudspeaker that marks the advancement and continuation our highly successful Prestige series.
Decades of design experience has proven time and time again that what separates a good loudspeaker from an exceptional one is the midrange. For the Prestige Five, we spent years developing a new, superb sounding 7-inch Kevlar® mid-woofer that conveys instruments and vocals with unprecedented clarity, resolution and naturalness. From there, we listened for 1000s of hours to decide on the exact woofer and tweeter to carefully balance the music spectrum and housed them in their own non-resonant and optimally-tuned enclosures.
The Prestige Five exemplifies a timeless combination of form, function and performance. It is the fruit of Qln’s four decades of speaker research, development, design and construction. A meticulous selection of matched components ensures every part of the speaker synergizes perfectly together. This was an extensive process involving multiple systems and genres of music over a long period of time to verify consistency. When you experience the Prestige Five, we are highly confident that our design approach and efforts will make perfect sense to your ears.
Driver Technology
Our 7” Kevlar® mid-woofer was custom developed by Qln together with industry renowned Danish driver manufacturer Scan Speak and offers the latest in 21st century advanced driver technology. It features an under-hung magnet system were the voice coil is in the magnet gap all the time, resulting in a totally linear motor system. Together with the extremely open basket, this allows for air flow without any compression or turbulence which offers more micro details and lowers acoustic noise typically found in standard baskets. Built-in copper rings in the magnet system offers symmetric drive and lower voice coil inductance, which results in higher dynamics in the midrange while also suppressing intermodulation distortion.
The long stroke, 7” hard cone woofer with the same unique magnet system as the mid-woofer works harmoniously with the inner volume of both drivers to produce well-controlled, powerful bass down to 26Hz.
Likewise, the unique Illuminator tweeter offers superb vocal rendition and excellent imaging and extension at all listening positions. Its large roll surround and textile dome diaphragm provides a flat frequency response above 30 KHz with outstanding off-axis dispersion. The unique AirCirc magnet system and its rear chamber eliminates any reflections and resonances.
Crossover
The constant impedance crossover in the Prestige Five is hardwired with non-inductive capacitors bypassed with copper film capacitors for the tweeter section. For the mid-woofer, we strictly use flat foil inductors. All components are fastened with soft damping glue and inductors are baked to avoid any internal component and filter resonances. Precision metal film resistors with high power handling capabilities, low noise, and temperature stable performance are used, resulting in perfect timing within the crossover and low noise throughout the entire frequency range
Cabinet Design
Our slanted baffle provides perfect time alignment between woofer and tweeter and the truncated pyramid cabinet top with its minimized baffle area suppresses standing waves inside the cabinet as well as baffle effects which in turn improves 3D imaging. The cabinet construction is based around Qln’s unique Qboard® technology, where structural resonances are eliminated. The bass reflex port with its trumpet shape at both ends eliminates air turbulence. The Cabinet is de-coupled from the floor via solid feet with cones and pucks constructed out of hard, high damping materials.
Cables and Speaker Connectors
Internal cabling is our own and specially designed and produced in Sweden. It consists of 12 solid core pure copper wires wrapped around a polypropylene core with polypropylene isolation, bounded with a high damping camel body. All components are carefully hand selected and individually tested for any deviances. Speaker terminals are WBT Nextgen® connectors with minimal connection materials made of silver/copper for best connection to the speaker resulting in lower distortion.
Non-Resonant Behavior
Every part of the speaker has one thing in common - non-resonant behavior. From connectors, cables, crossover components, speaker drivers, the cabinet, and even the damping feet are all characterized by non-resonant behavior. This suppresses disruptive noise, vastly improving dynamics and preserving silence between tones as a result of the low noise floor. The Prestige Five presents a more dynamic and relaxing sound with remarkable clarity. Nothing is added - just pure music!
Specifications
Impedance: 4 ohms
Tweeter: 25mm wide surround, Air-Circ magnet, soft dome
Mid-Woofer: 184mm Kevlar® cone, under-hung magnet system
Woofer: 184 hard cone, under-hung magnet system
Amplifier requirements: 50-250 Watt RMS
Sensitivity: 89 dB SPL 1-Watt 1m
Low frequency performance: -3dB 26Hz
Cabinet: Qboard® Technology
Terminal: Single wire, WBT Nextgen®
Dimensions (HxWxD): 1000x210x600mm (cabinet), 1054x315x650mm (with feet installed)
Weight: 41 kg each
Finish: Walnut Piano, Walnut Matt, White satin
MSRP - $15,995
Available in September! Please email or call for more information.
Full review here
See the full review here
Read the full review here
Full review here
“If you can afford it and have the funds for something like this and you are passionate about your two channel audio then I can not recommend any piece of audio gear any higher than this. If you are tired of the upgrade game, tired of spending a fortune on multiple cables and want end game quality in build and SOUND then this piece is what you may want to audition. Load it with the $3500 DAC module and $3500 Phono module and you can sell your expensive interconnects as they will not be needed. ; ) I have always said we do not need to spend a fortune on audio to enjoy it, and this is 100% true. One can get a system for $1500 total and enjoy it all day long and for many years. But to those who want the ultimate in performance and are willing to invest in audio, this product proves there are many ways to climb up the HiFi ladder when you are ready to do so.”
You can read this remarkable review in its entirety here
We are very pleased to announce that the Innuos ZENith MKIII, GigaWatt PF-2, and SGR HiFi racks received editor’s choice in this year’s Occasional Magazine buyer’s guide!
Check out this informative video from expert Hans Beekhuyzen thoroughly explaining what makes the ZENith a class leading Music Server.
Full review here
Read full review here